OBD Invert Roller Head Conversion Kit

Speargun Parts by OBD

Looking for more power, a quicker, straighter shot and no recall? Try out our OBD Invert Roller Head Our OBD Invert Roller Head Conversion Kit to upgrade your current speargun. Recommended for spearguns up to 110cm barrel length.

Kit comprises:

  • Invert roller head and stainless fixing screw
  • 4 metres of 2.1mm silver dyneema
  • 2 simple black Invert roller pulleys
  • 2 coloured line anchor screws
  • 1 nylon anchor screw

Our kit can be used to convert a speargun to inverted roller system or to build an invert roller speargun from parts.

Sturdy, compact and simple invert roller head, allowing the removal of rubbers to the rear of the speargun, improving power, maneouvrability and tracking over both conventional loop band and roller speargun set-ups.The roller head is made from a single piece of delrin, with simple invert roller wheels.The male spigot has an O-ring for sealing inside the barrel. Two stainless steel line wrap fingers at the front allow shooting line to be wrapped on the left or right of the muzzle. Has an integrated S/S muzzle bungee attaching loop that doubles as a reel line guide. A through hole in the head provides a start point for the load line.

Pulleys provided can be incorporated into the invert roller configuration to further improve power and ease of loading.

These come in a choice of spigot sizes: 26mm or 29mm to suit a big range of speargun barrels and brands. Simply remove your muzzle and measure the internal diameter to see which diameter spigot to choose. Can be sanded for smaller barrels or shimmed for larger barrels. 26mm spigot will fit the majority of 28mm barrels and 29mm will fit the larger 32mm barrels.

Line is a perfect size and style for use with the invert head and pulleys.

 

 

OBD Invert Roller Head Conversion Kit

$125.00
Speargun Parts by OBD
OBD Invert Roller Head Conversion Kit OBD Invert Roller Head Conversion Kit OBD Invert Roller Head Conversion Kit OBD Invert Roller Head Conversion Kit OBD Invert Roller Head Conversion Kit OBD Invert Roller Head Conversion Kit OBD Invert Roller Head Conversion Kit
OBD Invert Roller Head Conversion Kit OBD Invert Roller Head Conversion Kit OBD Invert Roller Head Conversion Kit OBD Invert Roller Head Conversion Kit OBD Invert Roller Head Conversion Kit OBD Invert Roller Head Conversion Kit OBD Invert Roller Head Conversion Kit

OBD Invert Roller Head Conversion Kit

$125.00
Speargun Parts by OBD
Spigot Diameter
$125.00

Looking for more power, a quicker, straighter shot and no recall? Try out our OBD Invert Roller Head Our OBD Invert Roller Head Conversion Kit to upgrade your current speargun. Recommended for spearguns up to 110cm barrel length.

Kit comprises:

  • Invert roller head and stainless fixing screw
  • 4 metres of 2.1mm silver dyneema
  • 2 simple black Invert roller pulleys
  • 2 coloured line anchor screws
  • 1 nylon anchor screw

Our kit can be used to convert a speargun to inverted roller system or to build an invert roller speargun from parts.

Sturdy, compact and simple invert roller head, allowing the removal of rubbers to the rear of the speargun, improving power, maneouvrability and tracking over both conventional loop band and roller speargun set-ups.The roller head is made from a single piece of delrin, with simple invert roller wheels.The male spigot has an O-ring for sealing inside the barrel. Two stainless steel line wrap fingers at the front allow shooting line to be wrapped on the left or right of the muzzle. Has an integrated S/S muzzle bungee attaching loop that doubles as a reel line guide. A through hole in the head provides a start point for the load line.

Pulleys provided can be incorporated into the invert roller configuration to further improve power and ease of loading.

These come in a choice of spigot sizes: 26mm or 29mm to suit a big range of speargun barrels and brands. Simply remove your muzzle and measure the internal diameter to see which diameter spigot to choose. Can be sanded for smaller barrels or shimmed for larger barrels. 26mm spigot will fit the majority of 28mm barrels and 29mm will fit the larger 32mm barrels.

Line is a perfect size and style for use with the invert head and pulleys.