OBD Spear Shaft 7.5mm Squarecut

Spear Shafts & Heads by OBD

Tried and proven South African hard drawn high carbon heat treated spring steel spear shafts are often the preferred choice in spears by those with experence. They are one of the strongest spears in the market place. They have a rust proof coating, tested for 3 months, 24 hours a day, with salt spray at 32 degrees C. Come with heavy duty 85mm pre-tuned smooth edged single flopper, with great holding capability and tri-cut tip for maximum penetration. Our shafts have been designed with no unnecessary holes to weaken the shaft. Come with three smooth shark fins, for use with dyneema or metal bridles and closed or open muzzles. The first shark fin has a hole for tying shooting line. Square cutout to suit mechanisms by Sea Hornet, Undersee, Riffe, Kes, Neptonics, Alexander, and others.

  • Hard drawn high tensile spring steel 7.5mm diameter
  • Super strong South African shafts
  • Rust proof coating
  • Tensile Strength 2030MPa (minimum) to 2060MPa
  • Three shark fins suits open muzzles
  • Soft edges for dyneema or metal bridles
  • Heavy duty smooth edged 85mm single flopper
  • Tri-cut tip for maximum penetration
  • Square cut out end

*** DOES NOT QUALIFY FOR FREE SHIPPING ***

OBD Spear Shaft 7.5mm Squarecut

$79.00
Spear Shafts & Heads by OBD
OBD Spear Shaft 7.5mm Squarecut OBD Spear Shaft 7.5mm Squarecut OBD Spear Shaft 7.5mm Squarecut OBD Spear Shaft 7.5mm Squarecut OBD Spear Shaft 7.5mm Squarecut OBD Spear Shaft 7.5mm Squarecut
OBD Spear Shaft 7.5mm Squarecut OBD Spear Shaft 7.5mm Squarecut OBD Spear Shaft 7.5mm Squarecut OBD Spear Shaft 7.5mm Squarecut OBD Spear Shaft 7.5mm Squarecut OBD Spear Shaft 7.5mm Squarecut

OBD Spear Shaft 7.5mm Squarecut

$79.00
Spear Shafts & Heads by OBD
Shaft Length cm
$79.00

Tried and proven South African hard drawn high carbon heat treated spring steel spear shafts are often the preferred choice in spears by those with experence. They are one of the strongest spears in the market place. They have a rust proof coating, tested for 3 months, 24 hours a day, with salt spray at 32 degrees C. Come with heavy duty 85mm pre-tuned smooth edged single flopper, with great holding capability and tri-cut tip for maximum penetration. Our shafts have been designed with no unnecessary holes to weaken the shaft. Come with three smooth shark fins, for use with dyneema or metal bridles and closed or open muzzles. The first shark fin has a hole for tying shooting line. Square cutout to suit mechanisms by Sea Hornet, Undersee, Riffe, Kes, Neptonics, Alexander, and others.

  • Hard drawn high tensile spring steel 7.5mm diameter
  • Super strong South African shafts
  • Rust proof coating
  • Tensile Strength 2030MPa (minimum) to 2060MPa
  • Three shark fins suits open muzzles
  • Soft edges for dyneema or metal bridles
  • Heavy duty smooth edged 85mm single flopper
  • Tri-cut tip for maximum penetration
  • Square cut out end

*** DOES NOT QUALIFY FOR FREE SHIPPING ***