Roisub Prisma TS (Torlon System) Invert Roller Head

Speargun Parts by Roisub

The Prism TS Head is one of the top the of the range in Roisub Invert Roller Heads - as used in Roisub spearguns! If you want to convert or build the absolute ultimate in invert roller spearguns, this is the head to use.

This Head has centralised yet moveable and replaceable dyneema stopper eyes to offer a simple and effective method for stopping your rubber & bridles. The Dyneema stopper makes this head very effective for all pre-tensioned systems.

The head uses a special dyneema with characteristics of strength and wear resistance for longevitiy and reliability. The hole before the pulleys can be used to insert a tensioning bolt and nut.

Materials and finishes of exceptional high quality, as in all Roisub equipment. The header is supplied along with the stainless steel screw threaded for fastening in some speargun tubes.

Roisub Head TS is suitable for barrels with an inner diameter around 25.7mm to 26mm. It is extremely compact, robust and light weight. The body of the head is floating, plugs and bolts are stainless steel, 6mm diameter.

Head come with the unique Roisub torlon bearings. The tested TS (Torlon system) is designed and studied in detail for use with all types of invert roller/ pulley systems. It is the result of a long process of optimisation, with more than 100 video and audio analyses, slow motion analysis and comparison in various configurations.

TS special pulleys are CNC machined and designed to work with heavy loads. Built with a shell of Delrin® and bearings made of Torlon®, they have minimum tolerances - less than 0.05mm.

The offset has been designed especially for making sure that the different passes of line do not interfere with each other. On the back of the head, inside the spigot, there is an M10 threaded hole, allowing the use of any steel bolt, for optimising the balance and trim of the speargun. The Head is derived from solid delrin, shaped by CNC machines and tested piece by piece to ensure maximum product quality.

Roisub Prisma TS (Torlon System) Invert Roller Head

$199.00
Speargun Parts by Roisub
Roisub Prisma TS (Torlon System) Invert Roller Head Roisub Prisma TS (Torlon System) Invert Roller Head Roisub Prisma TS (Torlon System) Invert Roller Head Roisub Prisma TS (Torlon System) Invert Roller Head Roisub Prisma TS (Torlon System) Invert Roller Head Roisub Prisma TS (Torlon System) Invert Roller Head Roisub Prisma TS (Torlon System) Invert Roller Head
Roisub Prisma TS (Torlon System) Invert Roller Head Roisub Prisma TS (Torlon System) Invert Roller Head Roisub Prisma TS (Torlon System) Invert Roller Head Roisub Prisma TS (Torlon System) Invert Roller Head Roisub Prisma TS (Torlon System) Invert Roller Head Roisub Prisma TS (Torlon System) Invert Roller Head Roisub Prisma TS (Torlon System) Invert Roller Head

Roisub Prisma TS (Torlon System) Invert Roller Head

$199.00
Speargun Parts by Roisub
$199.00

The Prism TS Head is one of the top the of the range in Roisub Invert Roller Heads - as used in Roisub spearguns! If you want to convert or build the absolute ultimate in invert roller spearguns, this is the head to use.

This Head has centralised yet moveable and replaceable dyneema stopper eyes to offer a simple and effective method for stopping your rubber & bridles. The Dyneema stopper makes this head very effective for all pre-tensioned systems.

The head uses a special dyneema with characteristics of strength and wear resistance for longevitiy and reliability. The hole before the pulleys can be used to insert a tensioning bolt and nut.

Materials and finishes of exceptional high quality, as in all Roisub equipment. The header is supplied along with the stainless steel screw threaded for fastening in some speargun tubes.

Roisub Head TS is suitable for barrels with an inner diameter around 25.7mm to 26mm. It is extremely compact, robust and light weight. The body of the head is floating, plugs and bolts are stainless steel, 6mm diameter.

Head come with the unique Roisub torlon bearings. The tested TS (Torlon system) is designed and studied in detail for use with all types of invert roller/ pulley systems. It is the result of a long process of optimisation, with more than 100 video and audio analyses, slow motion analysis and comparison in various configurations.

TS special pulleys are CNC machined and designed to work with heavy loads. Built with a shell of Delrin® and bearings made of Torlon®, they have minimum tolerances - less than 0.05mm.

The offset has been designed especially for making sure that the different passes of line do not interfere with each other. On the back of the head, inside the spigot, there is an M10 threaded hole, allowing the use of any steel bolt, for optimising the balance and trim of the speargun. The Head is derived from solid delrin, shaped by CNC machines and tested piece by piece to ensure maximum product quality.