Sigal Single Flopper 7.5mm Tricuspid Shaft

Spear Shafts & Heads by Sigal

Made from Swedish Sandvic Stainless Steel, the world's strongest corrosion-free shaft material. Sandvic steel approaches and often equals the Rockwell Hardness of the often used black high carbon steel shafts, typically from South Africa. No longer do you have to sacrifice strength for rust-resistance; now you can have both in the one shaft. No more rust marks on your gun, equipment or boat! The finest Italian engineered shafts in the world.

Single strong flopper 1.2mm thick, 80mm long and a rebated 7.5mm shaft means the flopper sits in for hydrodynamics. Penetration cone on all shafts eliminates the "shoulder" normally found where the flopper attaches, giving the shaft greater ability to penetrate with ease. Tricuspid cut spear tip.

Short rounded pins are very low profile giving minimal resistance through the water and smooth so they won't damage dyneema bridles. One rest-tab and 3 loader pins per shaft. Comes with a standard hole near the mechanism cutout for attaching shooting line and an additional hole to allow alternate attaching points outside of the mechanism. Cutout suits all euro style mechanisms.

  • Made from Super strong non-corrosive Sandvic Steel
  • Rockwell hardness 50-52 HRC, mpa 1800-2000
  • Euro style mechanism cutout
  • Single 80mm flopper, 1.2mm thick
  • Tricuspid cut tip
  • Short rounded pins suit all bridles
  • One rest-tab and 3 pins per shaft
  • 7.5mm diameter shaft
  • Italian precision engineered

*** DOES NOT QUALIFY FOR FREE SHIPPING ***

Sigal Single Flopper 7.5mm Tricuspid Shaft

$109.00
Spear Shafts & Heads by Sigal
Sigal Single Flopper 7.5mm Tricuspid Shaft Sigal Single Flopper 7.5mm Tricuspid Shaft Sigal Single Flopper 7.5mm Tricuspid Shaft Sigal Single Flopper 7.5mm Tricuspid Shaft Sigal Single Flopper 7.5mm Tricuspid Shaft Sigal Single Flopper 7.5mm Tricuspid Shaft Sigal Single Flopper 7.5mm Tricuspid Shaft
Sigal Single Flopper 7.5mm Tricuspid Shaft Sigal Single Flopper 7.5mm Tricuspid Shaft Sigal Single Flopper 7.5mm Tricuspid Shaft Sigal Single Flopper 7.5mm Tricuspid Shaft Sigal Single Flopper 7.5mm Tricuspid Shaft Sigal Single Flopper 7.5mm Tricuspid Shaft Sigal Single Flopper 7.5mm Tricuspid Shaft

Sigal Single Flopper 7.5mm Tricuspid Shaft

$109.00
Spear Shafts & Heads by Sigal
Shaft Length
$109.00

Made from Swedish Sandvic Stainless Steel, the world's strongest corrosion-free shaft material. Sandvic steel approaches and often equals the Rockwell Hardness of the often used black high carbon steel shafts, typically from South Africa. No longer do you have to sacrifice strength for rust-resistance; now you can have both in the one shaft. No more rust marks on your gun, equipment or boat! The finest Italian engineered shafts in the world.

Single strong flopper 1.2mm thick, 80mm long and a rebated 7.5mm shaft means the flopper sits in for hydrodynamics. Penetration cone on all shafts eliminates the "shoulder" normally found where the flopper attaches, giving the shaft greater ability to penetrate with ease. Tricuspid cut spear tip.

Short rounded pins are very low profile giving minimal resistance through the water and smooth so they won't damage dyneema bridles. One rest-tab and 3 loader pins per shaft. Comes with a standard hole near the mechanism cutout for attaching shooting line and an additional hole to allow alternate attaching points outside of the mechanism. Cutout suits all euro style mechanisms.

  • Made from Super strong non-corrosive Sandvic Steel
  • Rockwell hardness 50-52 HRC, mpa 1800-2000
  • Euro style mechanism cutout
  • Single 80mm flopper, 1.2mm thick
  • Tricuspid cut tip
  • Short rounded pins suit all bridles
  • One rest-tab and 3 pins per shaft
  • 7.5mm diameter shaft
  • Italian precision engineered

*** DOES NOT QUALIFY FOR FREE SHIPPING ***