Hunt Technology Magnum Bridle Inserts (Pair)

Bridles & Wishbones by Hunt Carbon Technology

 

Hunt Technology Magnum Bridle Inserts (Pair) are incredibly strong small diamater wishbone inserts, especially usefull for small bore rubbers.

These are simple but very technical, made from heat treated hardened 316 stainless steel. These have an incredible mechanical resistance and 50 HRC hardness to hold enormous loads with no deformation.

The hook loop is made from 2mm rod and is TIG welded onto a drilled sphere with a choice of ball diameters - 5mm or 6mm. The eye will take lines up to 3mm diameter, for your bridle bridge.

Bands with magnum insertswill be more hydrodynamic, because the steel balls are so small that, as you can see in the pictures, at the maximum tension of the rubber bands, there is very little swelling of the rubber. This also minimises perishing at the tie point due to the diminished distention.

These inserts allow you to grind cone ends on your the rubbers, for a friction reduction when firing, efficiency, increase of the power and precision of the shot.

These allow quick replacement of worn bridle bridges, using a knife, as they are made of stainless steel.

Inserts are so light, that the rubber removed by grinding the cone, exceeds the weight of the inserts.

These are the smartest choice for high loads and very small bore rubbers. Unless lost, they will last a lifetime. 

Hunt Technology Magnum Bridle Inserts (Pair)

$17.95
Bridles & Wishbones by Hunt Carbon Technology
Hunt Technology Magnum Bridle Inserts (Pair) Hunt Technology Magnum Bridle Inserts (Pair) Hunt Technology Magnum Bridle Inserts (Pair)
Hunt Technology Magnum Bridle Inserts (Pair) Hunt Technology Magnum Bridle Inserts (Pair) Hunt Technology Magnum Bridle Inserts (Pair)

Hunt Technology Magnum Bridle Inserts (Pair)

$17.95
Bridles & Wishbones by Hunt Carbon Technology
Ball Diamter
$17.95

 

Hunt Technology Magnum Bridle Inserts (Pair) are incredibly strong small diamater wishbone inserts, especially usefull for small bore rubbers.

These are simple but very technical, made from heat treated hardened 316 stainless steel. These have an incredible mechanical resistance and 50 HRC hardness to hold enormous loads with no deformation.

The hook loop is made from 2mm rod and is TIG welded onto a drilled sphere with a choice of ball diameters - 5mm or 6mm. The eye will take lines up to 3mm diameter, for your bridle bridge.

Bands with magnum insertswill be more hydrodynamic, because the steel balls are so small that, as you can see in the pictures, at the maximum tension of the rubber bands, there is very little swelling of the rubber. This also minimises perishing at the tie point due to the diminished distention.

These inserts allow you to grind cone ends on your the rubbers, for a friction reduction when firing, efficiency, increase of the power and precision of the shot.

These allow quick replacement of worn bridle bridges, using a knife, as they are made of stainless steel.

Inserts are so light, that the rubber removed by grinding the cone, exceeds the weight of the inserts.

These are the smartest choice for high loads and very small bore rubbers. Unless lost, they will last a lifetime.