OBD 7.5mm Classic Single Flopper Spear Shaft

Spear Shafts & Heads by OBD

OBD 7.5mm Classic Single Flopper Spear Shafts are Italian custom made for OBD to exacting standards of finish and strength to rival the best in the world.

Spear shaft features:

  • Moderately elongated 17mm long tricut / tri-faced tip for clean, effective and efficient piercing.
  • Bonus 21mm stainless steel elongated penetration cone for hydrodynamic performance, protection of flopper from debris and max fish penetration.
  • 85mm heavy duty, smoothed and pre-tuned down flopper to provide positive locking when opened.
  • Made from 7.5mm diameter hardened 17-4 PH supreme quality stainless steel.
  • Smooth elongated 4mm high loading fins suit open and most closed muzzles.
  • Shaped fins will accept metal and 1.7mm up to 2.2mm dyneema bridles.
  • Classic loading fins provides hydrodynamic efficiency and ease of reverse removal when retrieving shaft from fish.
  • Conveniently positioned rest tab around 350mm from rear enhances loading ease and provides a de-power option for short range shots.
  • Two more low profile classic fins are positioned exceptionally close to mechanism for rubber loading tabs - approximately 50mm and 75mm from rear of shaft.
  • Shaft setup is optimal and minimal - perfect for all roller and single or double band spearguns.
  • Two shooting line holes for shooting line up to 2mm - one at rear and one 60mm from the rear.
  • Additional doghouse loop about 275mm from the rear provides a position uniquely forward to attach line of larger diameter for blue-water or roller spearguns.
  • Curved euro cut tang at rear fits the majority of spearguns in the world.

OBD 7.5mm Classic Single Flopper Spear Shaft

$125.00
Spear Shafts & Heads by OBD
OBD 7.5mm Classic Single Flopper Spear Shaft OBD 7.5mm Classic Single Flopper Spear Shaft OBD 7.5mm Classic Single Flopper Spear Shaft OBD 7.5mm Classic Single Flopper Spear Shaft OBD 7.5mm Classic Single Flopper Spear Shaft OBD 7.5mm Classic Single Flopper Spear Shaft OBD 7.5mm Classic Single Flopper Spear Shaft OBD 7.5mm Classic Single Flopper Spear Shaft OBD 7.5mm Classic Single Flopper Spear Shaft OBD 7.5mm Classic Single Flopper Spear Shaft
OBD 7.5mm Classic Single Flopper Spear Shaft OBD 7.5mm Classic Single Flopper Spear Shaft OBD 7.5mm Classic Single Flopper Spear Shaft OBD 7.5mm Classic Single Flopper Spear Shaft OBD 7.5mm Classic Single Flopper Spear Shaft OBD 7.5mm Classic Single Flopper Spear Shaft OBD 7.5mm Classic Single Flopper Spear Shaft OBD 7.5mm Classic Single Flopper Spear Shaft OBD 7.5mm Classic Single Flopper Spear Shaft OBD 7.5mm Classic Single Flopper Spear Shaft

OBD 7.5mm Classic Single Flopper Spear Shaft

$125.00
Spear Shafts & Heads by OBD
Length
$125.00

OBD 7.5mm Classic Single Flopper Spear Shafts are Italian custom made for OBD to exacting standards of finish and strength to rival the best in the world.

Spear shaft features:

  • Moderately elongated 17mm long tricut / tri-faced tip for clean, effective and efficient piercing.
  • Bonus 21mm stainless steel elongated penetration cone for hydrodynamic performance, protection of flopper from debris and max fish penetration.
  • 85mm heavy duty, smoothed and pre-tuned down flopper to provide positive locking when opened.
  • Made from 7.5mm diameter hardened 17-4 PH supreme quality stainless steel.
  • Smooth elongated 4mm high loading fins suit open and most closed muzzles.
  • Shaped fins will accept metal and 1.7mm up to 2.2mm dyneema bridles.
  • Classic loading fins provides hydrodynamic efficiency and ease of reverse removal when retrieving shaft from fish.
  • Conveniently positioned rest tab around 350mm from rear enhances loading ease and provides a de-power option for short range shots.
  • Two more low profile classic fins are positioned exceptionally close to mechanism for rubber loading tabs - approximately 50mm and 75mm from rear of shaft.
  • Shaft setup is optimal and minimal - perfect for all roller and single or double band spearguns.
  • Two shooting line holes for shooting line up to 2mm - one at rear and one 60mm from the rear.
  • Additional doghouse loop about 275mm from the rear provides a position uniquely forward to attach line of larger diameter for blue-water or roller spearguns.
  • Curved euro cut tang at rear fits the majority of spearguns in the world.