Hunt Technology Spear Shaft Single Flopper 7.5mm With Cone

Spear Shafts & Heads by Hunt Carbon Technology

If you're looking for the best finished shaft in the world, you've found it.

These shafts are extremely strong with many features and advantages not found in other brands.

Features a slow taper elongated tricuspid point and the barb is not recessed. If the spear hits in its vital points you have more chances to kill the fish with one shot.

The large 85mm ultra smooth, extra thick, down flopper barb provides maximum hold on the fish with the least amount of damage. The penetration is enhanced to that of a double barb thanks to the very low profile super strong welded pin.

Comes with extra long tapered cone that is welded onto the shaft and very low profile super strong welded flopper pins.

Single flopper is positioned 80mm from the spear tip.

Comes with very low profile super strong welded flopper pins.

Fin position from rear end of shaft: 52mm, 83mm,113mm and 350mm.

Oval end cut fits all European style speargun mechanisms.

  • Shaft is made in 17.4 PH hardened stainless steel
  • Steel used is certified to be true and straight and absolutely smooth
  • Shaft is C.N.C. machined
  • Spear has 4 fins - one rest-tab and 3 loading tabs - the last positioned very close to the mechanism provided maximum band stretch.
  • Rest tab has a hole for alternate attachment of shooting line
  • Also has rear hole for shooting line
  • All fins are low profile and smoothed for use of both metal or dyneema
  • Shark fin tips are TIG welded and create a stiffening bridge on the shaft, increasing its ballistic performances.

It's a shaft for powerful spearguns, it has a sharpened tricuspid point and the 1.2mm thick flopper.

*** DOES NOT QUALIFY FOR FREE SHIPPING ***

Hunt Technology Spear Shaft Single Flopper 7.5mm With Cone

$149.00
Spear Shafts & Heads by Hunt Carbon Technology
Hunt Technology Spear Shaft Single Flopper 7.5mm With Cone Hunt Technology Spear Shaft Tri-Cut Single Flopper 7.5mm Hunt Technology Spear Shaft Tri-Cut Single Flopper 7.5mm Hunt Technology Spear Shaft Tri-Cut Single Flopper 7.5mm Hunt Technology Spear Shaft Tri-Cut Single Flopper 7.5mm Hunt Technology Spear Shaft Tri-Cut Single Flopper 7.5mm Hunt Technology Spear Shaft Tri-Cut Single Flopper 7.5mm Hunt Technology Spear Shaft Tri-Cut Single Flopper 7.5mm Hunt Technology Spear Shaft Single Flopper 7.5mm With Cone
Hunt Technology Spear Shaft Single Flopper 7.5mm With Cone Hunt Technology Spear Shaft Tri-Cut Single Flopper 7.5mm Hunt Technology Spear Shaft Tri-Cut Single Flopper 7.5mm Hunt Technology Spear Shaft Tri-Cut Single Flopper 7.5mm Hunt Technology Spear Shaft Tri-Cut Single Flopper 7.5mm Hunt Technology Spear Shaft Tri-Cut Single Flopper 7.5mm Hunt Technology Spear Shaft Tri-Cut Single Flopper 7.5mm Hunt Technology Spear Shaft Tri-Cut Single Flopper 7.5mm Hunt Technology Spear Shaft Single Flopper 7.5mm With Cone

Hunt Technology Spear Shaft Single Flopper 7.5mm With Cone

$149.00
Spear Shafts & Heads by Hunt Carbon Technology
Shaft Length cm
$149.00

If you're looking for the best finished shaft in the world, you've found it.

These shafts are extremely strong with many features and advantages not found in other brands.

Features a slow taper elongated tricuspid point and the barb is not recessed. If the spear hits in its vital points you have more chances to kill the fish with one shot.

The large 85mm ultra smooth, extra thick, down flopper barb provides maximum hold on the fish with the least amount of damage. The penetration is enhanced to that of a double barb thanks to the very low profile super strong welded pin.

Comes with extra long tapered cone that is welded onto the shaft and very low profile super strong welded flopper pins.

Single flopper is positioned 80mm from the spear tip.

Comes with very low profile super strong welded flopper pins.

Fin position from rear end of shaft: 52mm, 83mm,113mm and 350mm.

Oval end cut fits all European style speargun mechanisms.

  • Shaft is made in 17.4 PH hardened stainless steel
  • Steel used is certified to be true and straight and absolutely smooth
  • Shaft is C.N.C. machined
  • Spear has 4 fins - one rest-tab and 3 loading tabs - the last positioned very close to the mechanism provided maximum band stretch.
  • Rest tab has a hole for alternate attachment of shooting line
  • Also has rear hole for shooting line
  • All fins are low profile and smoothed for use of both metal or dyneema
  • Shark fin tips are TIG welded and create a stiffening bridge on the shaft, increasing its ballistic performances.

It's a shaft for powerful spearguns, it has a sharpened tricuspid point and the 1.2mm thick flopper.

*** DOES NOT QUALIFY FOR FREE SHIPPING ***