OBD Speed Bridle Inserts (Pair)

Bridles & Wishbones by OBD

Our OBD Speed Bridle Inserts are a pair of streamlined, strong reinforced nylon wishbone ends for inserting into bulk rubber, to make your own spearfishing speargun rubbers. Use with dyneema or spectra wishbone line to make re-usable and easily replaceable dyneema bridles.

Smaller, lighter and more streamlined shape than other nylon inserts. Also come in a choice of colours: red, green, blue or black.

They have smoothly tapered ends for easy insertion into any diameter of rubber, with or without a bridle insertion tool.

Hole in the tope will take bridle line up to 1.8mm in diameter. Line is threaded down through the hole on top, out the larger side hole, then tie a knot. A dob of super glue on the knot will give added security.

Makes replacing your rubber and dyneema simple and easy.

These inserts can be re-used over and over again. Allow simple replacement of worn dyneema without removing the fittings from your speargun rubber.

  • Re-usable wishbone ends
  • Streamlined shape
  • Replace worn dyneema simply
  • Tapered end for easy insert
  • Make your own rubbers

OBD Speed Bridle Inserts (Pair)

$5.50
Bridles & Wishbones by OBD
OBD Speed Bridle Inserts (Pair) OBD Speed Bridle Inserts (Pair)
OBD Speed Bridle Inserts (Pair) OBD Speed Bridle Inserts (Pair)

OBD Speed Bridle Inserts (Pair)

$5.50
Bridles & Wishbones by OBD
COLOUR
$5.50

Our OBD Speed Bridle Inserts are a pair of streamlined, strong reinforced nylon wishbone ends for inserting into bulk rubber, to make your own spearfishing speargun rubbers. Use with dyneema or spectra wishbone line to make re-usable and easily replaceable dyneema bridles.

Smaller, lighter and more streamlined shape than other nylon inserts. Also come in a choice of colours: red, green, blue or black.

They have smoothly tapered ends for easy insertion into any diameter of rubber, with or without a bridle insertion tool.

Hole in the tope will take bridle line up to 1.8mm in diameter. Line is threaded down through the hole on top, out the larger side hole, then tie a knot. A dob of super glue on the knot will give added security.

Makes replacing your rubber and dyneema simple and easy.

These inserts can be re-used over and over again. Allow simple replacement of worn dyneema without removing the fittings from your speargun rubber.

  • Re-usable wishbone ends
  • Streamlined shape
  • Replace worn dyneema simply
  • Tapered end for easy insert
  • Make your own rubbers