Picasso Platinum 6.5mm Pinned Threaded Shaft

Spear Shafts & Heads by Picasso

Picasso premium Platinum 6.5mm threaded shaft, made from the best quality stainless steel, hard drawn to 1500-1600 MPa and 47-48 Rockwell Hardness. Has an M7 (7mm) standard thread to fit 7mm ID threaded spear heads, slip tips and prangers. Has a rounded Universal end cut to suit all Euro style mechs including all European, South African, Riffe Euro, Torelli and Aimrite spearguns.

There are 2 line attaching options, one at the rear and one mech side of the first pin.

Features 3 small very smooth curved loading pins, 4mm high, perfectly compatible with dyneema or metal bridles.

Pins located at 85mm and 200mm and a rest tab at 400mm from back of shaft. The rest tab makes loading difficult rubbers a breeze or is an option to de-power the speargun when needed.

All the features of a South African shaft, and more, but in a high tensile non-corrosive spring stainless steel.

  • Hardened spring stainless steel
  • 1500-1600 MPa
  • 47-48 Rockwell Hardness
  • 7mm diameter spear shaft
  • M7 (7mm) diameter thread
  • 3 loading pins
  • Dyneema bridle compatible
  • Euro end cut
  • Non-corrosive

*** DOES NOT QUALIFY FOR FREE SHIPPING ***

Picasso Platinum 6.5mm Pinned Threaded Shaft

$69.00
Spear Shafts & Heads by Picasso
Picasso Platinum 6.5mm Pinned Threaded Shaft Picasso Platinum 6.5mm Pinned Threaded Shaft Picasso Platinum 6.5mm Pinned Threaded Shaft Picasso Platinum 6.5mm Pinned Threaded Shaft Picasso Platinum 6.5mm Pinned Threaded Shaft Picasso Platinum 6.5mm Pinned Threaded Shaft
Picasso Platinum 6.5mm Pinned Threaded Shaft Picasso Platinum 6.5mm Pinned Threaded Shaft Picasso Platinum 6.5mm Pinned Threaded Shaft Picasso Platinum 6.5mm Pinned Threaded Shaft Picasso Platinum 6.5mm Pinned Threaded Shaft Picasso Platinum 6.5mm Pinned Threaded Shaft

Picasso Platinum 6.5mm Pinned Threaded Shaft

$69.00
Spear Shafts & Heads by Picasso
Shaft Length cm
$69.00

Picasso premium Platinum 6.5mm threaded shaft, made from the best quality stainless steel, hard drawn to 1500-1600 MPa and 47-48 Rockwell Hardness. Has an M7 (7mm) standard thread to fit 7mm ID threaded spear heads, slip tips and prangers. Has a rounded Universal end cut to suit all Euro style mechs including all European, South African, Riffe Euro, Torelli and Aimrite spearguns.

There are 2 line attaching options, one at the rear and one mech side of the first pin.

Features 3 small very smooth curved loading pins, 4mm high, perfectly compatible with dyneema or metal bridles.

Pins located at 85mm and 200mm and a rest tab at 400mm from back of shaft. The rest tab makes loading difficult rubbers a breeze or is an option to de-power the speargun when needed.

All the features of a South African shaft, and more, but in a high tensile non-corrosive spring stainless steel.

  • Hardened spring stainless steel
  • 1500-1600 MPa
  • 47-48 Rockwell Hardness
  • 7mm diameter spear shaft
  • M7 (7mm) diameter thread
  • 3 loading pins
  • Dyneema bridle compatible
  • Euro end cut
  • Non-corrosive

*** DOES NOT QUALIFY FOR FREE SHIPPING ***